Suzuki Jimny 32mm wheel spacers widen the vehicle’s track by 32mm at each wheel. This creates a total track increase of approximately 64mm across each axle and gives the Jimny a wider, more planted stance.
Des Sol CNC-machines each spacer from high-strength 6082-T6 aluminium. As a result, the spacers combine precise fitment with strong structural properties and good resistance to corrosion. The product includes a complete set of four spacers.
Suzuki Jimny 32mm Wheel Spacers: Key Features
- Complete set of four wheel spacers
- 32mm spacer thickness per wheel
- Approximately 64mm total track increase per axle
- Fits compatible Suzuki Jimny Gen 3 and Gen 4 models
- CNC-machined for accurate fitment
- Made from high-strength 6082-T6 aluminium
- Good natural resistance to corrosion
- Designed for road and off-road applications
- Helps the Jimny follow wider 4×4 vehicle tracks
- Creates a wider vehicle stance
High-Strength 6082-T6 Aluminium
The Jimny wheel spacer set uses 6082-T6 aluminium, a high-strength alloy from the 6000 series. Its controlled grain structure provides useful strength for precisely machined structural parts.
Furthermore, the alloy offers good resistance to corrosion. However, installers must still keep the mating surfaces clean and free from dirt, paint, rust and grease to achieve secure fitment.
A Wider Track for the Jimny
A standard Jimny has a narrower track than many larger 4×4 vehicles. Consequently, the wheels may not sit neatly in the ruts created by wider vehicles on well-used off-road routes.
The 32mm Jimny spacers move each wheel outward and create a wider track. This change can help the vehicle follow common trail ruts and may produce a more settled feel during cornering.
Nevertheless, wheel spacers do not correct worn suspension parts, poor wheel alignment or unsuitable tyre pressures. Drivers must repair these problems separately.
Wheel and Body Clearance
Moving the wheels outward changes their position in relation to the arches, tyres, suspension and bodywork. Therefore, always confirm clearance before ordering, especially if the vehicle has wider tyres, aftermarket wheels or a suspension lift.
After installation, check clearance while turning the steering from lock to lock. Also, check it through the full suspension range. The tyres must not touch the arches, bumper, brake hoses or suspension parts.
Professional Installation and Inspection
A trained installer should fit the Suzuki Jimny 32mm wheel spacers. First, the installer must clean the hub and wheel mating surfaces. The installer must then tighten the spacer and wheel hardware evenly to the specifications supplied with the product and vehicle.
After the required bedding period, remove the wheels and check the spacer hardware again. In addition, inspect the spacers, studs, wheel nuts, hubs and bearings during normal vehicle services.
Important: Wheel spacers alter the vehicle’s track, steering feel and loads placed on related parts. Confirm local road rules, insurance requirements and wheel-arch coverage before installation. Never use damaged spacers, studs or wheel nuts.